DECABORANE suppliers
DECABORANE
- CAS:
- 17702-41-9
- MF:
- B10H14
- MW:
- 112.14
Company Type
Properties
- Melting point:
- 99 °C
- Boiling point:
- 213 °C
- Density
- 0,94 g/cm3
- vapor pressure
- 0.15 mmHg ( 20 °C)
- Flash point:
- 213°C
- storage temp.
- Flammables area
- solubility
- Benzene (Slightly), Chloroform (Sparingly), Ethyl Acetate (Slightly)
- form
- white orthorhombic crystals
- color
- white
- Water Solubility
- Soluble in alcohol, toluene, ethyl acetate and benzene. Slightly soluble in cold water.
- Merck
- 14,2845
- Exposure limits
- TLV-TWA skin 0.05 ppm (0.25 mg/m3 ) (ACGIH and OSHA); STEL skin 0.15 ppm (0.75 mg/m3 ) (ACGIH); IDLH 20 ppm (NIOSH).
- Stability:
- store cold
Safety Information
- Symbol(GHS)
GHS02,GHS06
- Signal word
- Danger
- Hazard statements
- H228-H301+H311-H315-H319-H330-H335
- Precautionary statements
- P210-P260-P280-P284-P301+P310-P305+P351+P338
- Hazard Codes
- F,T+
- Risk Statements
- 5-24/25-26-36/37/38-11
- Safety Statements
- 16-27-36/37/39-45
- RIDADR
- 1868
- WGK Germany
- 3
- RTECS
- HD1400000
- TSCA
- Yes
- HazardClass
- 4.1
- PackingGroup
- II
- HS Code
- 28500020
- Toxicity
- cat,LD50,skin,126mg/kg (126mg/kg),KIDNEY, URETER, AND BLADDER: "CHANGES IN TUBULES (INCLUDING ACUTE RENAL FAILURE, ACUTE TUBULAR NECROSIS)"LIVER: FATTY LIVER DEGERATIONBEHAVIORAL: CONVULSIONS OR EFFECT ON SEIZURE THRESHOLD,"Spravochnik po Toksikologii i Gigienicheskim Normativam Vol. -, Pg. 60, 1999.
- IDLA
- 15 mg/m3
Use
DECABORANE mixed with carbon tetrachloride is dangerously shock sensitive. DECABORANE reacts slowly with air but when mixed with air or oxygen, DECABORANE becomes highly flammable and may explode. DECABORANE undergoes an explosive reaction with most oxidizing agents including halogenated hydrocarbons. DECABORANE may give off toxic fumes of unburned material. When heated to decomposition, DECABORANE emits toxic fumes of boron oxides. Incompatible with ethers; halocarbons; oxygen at 212F; dimethyl sulfoxide, most oxidizing agents, including halogenated hydrocarbons. DECABORANE is corrosive to natural rubber, some synthetic rubbers, some greases, and some lubricants. Normally stable, but becomes unstable at elevated temperature and pressure. Hazardous polymerization may not occur.
According to relevant laws, regulations, policies and the provisions of this website, this website does not display the product information!
The source is "剧毒、有毒、易致癌化学品". If the information is inaccurate, please contact the platform to modify it.
contact information：info@chemicalbook.com 400-158-660