| Product Identification | Back to Contents | 【Product Name】
4-Aminobenzenesulfonyl fluoride | 【Synonyms】
(p-Fluorosulfonyl)aniline
4-(Fluorosulfonyl)aniline
4-Aminobenzenesulfonyl fluoride
p-Sulfanilyl fluoride | 【CAS】
98-62-4 | 【Formula】
C6H6FNO2S | 【Molecular Weight】
175.17 | 【EINECS】
202-687-4 | 【Merck】
12,9099 | 【Beilstein/Gmelin】
2209488 | 【Beilstein Reference】
4-14-00-02658 |
| Physical and Chemical Properties | Back to Contents | 【Appearance】
White or yellow-white solid. | 【Solubility in water】
Slightly soluble | 【Melting Point】
71 - 72 | 【pKa/pKb】
13.66 (pKb) | 【Usage】
Substance is used in the prepn of dyes which pick up light readily. |
| First Aid Measures | Back to Contents | 【Ingestion】
Get medical aid. Do NOT induce vomiting. If conscious and alert, rinse mouth and drink 2-4 cupfuls of milk or water. | 【Inhalation】
Remove from exposure to fresh air immediately. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Get medical aid. DO NOT use mouth-to-mouth respiration. If breathing has ceased apply artificial respiration using oxygen and a suitable mechanical device such as a bag and a mask. | 【Skin】
Get medical aid immediately. Immediately flush skin with plenty of soap and water for at least 15 minutes while removing contaminated clothing and shoes. Wash clothing before reuse. Destroy contaminated shoes. | 【Eyes】
Get medical aid. Do NOT allow victim to rub or keep eyes closed. Extensive irrigation is required (at least 30 minutes). |
| Handling and Storage | Back to Contents | 【Storage】
Store in a tightly closed container. Store in a cool, dry, well-ventilated area away from incompatible substances. Corrosives area. Do not store in metal containers. Store protected from moisture. | 【Handling】
Wash thoroughly after handling. Use with adequate ventilation. Minimize dust generation and accumulation. Avoid contact with eyes, skin, and clothing. Keep container tightly closed. Avoid ingestion and inhalation. Do not allow contact with water. Discard contaminated shoes. Keep from contact with moist air and steam. |
| Hazards Identification | Back to Contents | 【Ingestion】
May cause severe and permanent damage to the digestive tract. Causes gastrointestinal tract burns. The toxicological properties of this substance have not been fully investigated. | 【Inhalation】
May cause severe irritation of the respiratory tract with sore throat, coughing, shortness of breath and delayed lung edema. Causes chemical burns to the respiratory tract. The toxicological properties of this substance have not been fully investigated. | 【Skin】
Causes skin burns. | 【Eyes】
Causes eye burns. | 【Hazards】
Contact with metals may evolve flammable hydrogen gas. | 【UN (DOT)】
1690 |
| Exposure Controls/Personal Protection | Back to Contents | 【Personal Protection】
Eyes: Wear appropriate protective eyeglasses or chemical safety goggles as described by OSHA's eye and face protection regulations in 29 CFR 1910.133 or European Standard EN166. Skin: Wear appropriate protective gloves to prevent skin exposure. Clothing: Wear appropriate protective clothing to prevent skin exposure. | 【Respirators】
A respiratory protection program that meets OSHA's 29 CFR 1910.134 and ANSI Z88.2 requirements or European Standard EN 149 must be followed whenever workplace conditions warrant a respirator's use. |
| Fire Fighting Measures | Back to Contents | 【Fire Fighting】
Wear a self-contained breathing apparatus in pressure-demand, MSHA/NIOSH (approved or equivalent), and full protective gear. During a fire, irritating and highly toxic gases may be generated by thermal decomposition or combustion. Contact with metals may evolve flammable hydrogen gas. Extinguishing media: Use agent most appropriate to extinguish fire. Do NOT get water inside containers. In case of fire use water spray, dry chemical, carbon dioxide, or appropriate foam. | 【Fire Potential】
Non-combustible, substance itself does not burn but may decompose upon heating to produce corrosive and/or toxic fumes. |
| Accidental Release Measures | Back to Contents | 【Small spills/leaks】
Vacuum or sweep up material and place into a suitable disposal container. Avoid runoff into storm sewers and ditches which lead to waterways. Clean up spills immediately, using the appropriate protective equipment. Avoid generating dusty conditions. Provide ventilation. Do not get water inside containers. |
| Stability and Reactivity | Back to Contents | 【Incompatibilities】
Moisture, strong bases, strong oxidizing agents. | 【Stability】
Stable at room temperature in closed containers under normal storage and handling conditions. | 【Decomposition】
Carbon monoxide, oxides of nitrogen, oxides of sulfur, irritating and toxic fumes and gases, carbon dioxide, fluoride fumes. | 【Combustion Products】
Fire may produce irritating, corrosive and/or toxic gases. |
|
| Company Name: |
Bide Pharmatech Ltd. |
| Tel: |
400-1647117 15221909166 |
| Fax: |
+86-21-61629029 |
| WebSite: |
www.bidepharm.com |
| Company Name: |
Henan Alpha Chemical Co., Ltd. |
| Tel: |
0371-55055611 18137792234 |
| Fax: |
QQ：3002694073 |
| WebSite: |
https://www.chemicalbook.com/ShowSupplierProductsList31206/0.htm |
| Company Name: |
Nextpeptide Inc |
| Tel: |
+86-0571-81612335 +8613336028439 |
| Fax: |
|
| WebSite: |
http://www.nextpeptide.com/ |
|