| Product Identification | Back to Contents | 【Product Name】
sec-Butyl iodide | 【Synonyms】
sec-Butyl iodide
sec-Iodobutane | 【CAS】
513-48-4 | 【Formula】
C4H9I | 【Molecular Weight】
184.02 | 【EINECS】
208-163-1 | 【RTECS】
EK4410000 | 【RTECS Class】
Tumorigen; Mutagen | 【Merck】
13,1573 | 【Beilstein/Gmelin】
1718777 | 【Beilstein Reference】
4-01-00-00272 | 【EC Class】
flammable |
| Physical and Chemical Properties | Back to Contents | 【Appearance】
A colorless liquid. | 【Solubility in water】
Insoluble | 【Melting Point】
-104 | 【Boiling Point】
119 | 【Vapor Pressure】
19 (25 C) | 【Density】
1.6263 g/cm3 (0 C) | 【Partition Coefficient】
2.91 | 【Heat Of Vaporization】
33.3 kJ/mol | 【Usage】
Used to make other chemicals and as a solvent. | 【Vapor Density】
6.3 | 【Refractive Index】
1.4989 (20 C) |
| First Aid Measures | Back to Contents | 【Ingestion】
Do NOT induce vomiting. If victim is conscious and alert, give 2-4 cupfuls of milk or water. Never give anything by mouth to an unconscious person. Get medical aid immediately. | 【Inhalation】
Get medical aid immediately. Remove from exposure to fresh air immediately. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. DO NOT use mouth-to-mouth respiration. | 【Skin】
Immediately flush skin with plenty of soap and water for at least 15 minutes while removing contaminated clothing and shoes. Get medical aid if irritation develops or persists. Wash clothing before reuse. | 【Eyes】
Immediately flush eyes with plenty of water for at least 15 minutes, occasionally lifting the upper and lower eyelids. Get medical aid immediately. |
| Handling and Storage | Back to Contents | 【Storage】
Keep away from heat, sparks, and flame. Keep away from sources of ignition. Store in a cool, dry place. Do not store in direct sunlight. Store in a tightly closed container. Flammables-area. | 【Handling】
Wash thoroughly after handling. Wash hands before eating. Remove contaminated clothing and wash before reuse. Use only in a well ventilated area. Avoid contact with eyes, skin, and clothing. Empty containers retain product residue, (liquid and/or vapor), and can be dangerous. Avoid contact with heat, sparks and flame. Avoid ingestion and inhalation. Do not pressurize, cut, weld, braze, solder, drill, grind, or expose empty containers to heat, sparks or open flames. |
| Hazards Identification | Back to Contents | 【Inhalation】
Causes respiratory tract irritation. The toxicological properties of this substance have not been fully investigated. | 【Skin】
Causes skin irritation. | 【Eyes】
Causes eye irritation. | 【Ingestion】
Causes gastrointestinal irritation with nausea, vomiting and diarrhea. May cause kidney damage. The toxicological properties of this substance have not been fully investigated. | 【Hazards】
Vapors may form explosive mixtures with air. Vapors may travel to source of ignition and flash back. Most vapors are heavier than air. They will spread along ground and collect in low or confined areas (sewers, basements, tanks). Vapor explosion hazard indoors, outdoors or in sewers. May polymerize explosively when heated or involved in a fire. Runoff to sewer may create fire or explosion hazard. Containers may explode when heated. Many liquids are lighter than water. | 【EC Risk Phrase】
R 10 36/37/38 | 【EC Safety Phrase】
S 26 36 | 【UN (DOT)】
2390 |
| Exposure Controls/Personal Protection | Back to Contents | 【Personal Protection】
Eyes: Wear appropriate protective eyeglasses or chemical safety goggles as described by OSHA's eye and face protection regulations in 29 CFR 1910.133 or European Standard EN166. Skin: Wear appropriate protective gloves to prevent skin exposure. Clothing: Wear appropriate protective clothing to prevent skin exposure. | 【Respirators】
Follow the OSHA respirator regulations found in 29CFR 1910.134 or European Standard EN 149. Always use a NIOSH or European Standard EN 149 approved respirator when necessary. | 【Exposure Effects】
Overexposure may cause delayed kidney injury. Chronic ingestion may cause neurological symptoms. |
| Fire Fighting Measures | Back to Contents | 【Flash Point】
24 | 【Fire Fighting】
Wear a self-contained breathing apparatus in pressure-demand, MSHA/NIOSH (approved or equivalent), and full protective gear. During a fire, irritating and highly toxic gases may be generated by thermal decomposition or combustion. Use water spray to keep fire-exposed containers cool. Extinguishing media: For small fires, use dry chemical, carbon dioxide, water spray or alcohol-resistant foam. Use water spray to cool fire-exposed containers. Water may be ineffective. For large fires, use water spray, fog or alcohol-resistant foam. | 【Fire Potential】
HIGHLY FLAMMABLE. |
| Accidental Release Measures | Back to Contents | 【Small spills/leaks】
Absorb spill with inert material, (e.g., dry sand or earth), then place into a chemical waste container. Avoid runoff into storm sewers and ditches which lead to waterways. Clean up spills immediately, using the appropriate protective equipment. Scoop up with a nonsparking tool, then place into a suitable container for disposal. Remove all sources of ignition. |
| Stability and Reactivity | Back to Contents | 【Disposal Code】
2 | 【Stability】
Stable under normal temperatures and pressures. | 【Incompatibilities】
Strong oxidants and strong bases. May discolor upon exposure to light. | 【Decomposition】
Carbon monoxide, irritating and toxic fumes and gases, carbon dioxide, hydrogen iodide. | 【Combustion Products】
During a fire, irritating and highly toxic gases may be generated by thermal decomposition or combustion. |
|
| Company Name: |
Alfa Aesar |
| Tel: |
400-6106006 |
| Fax: |
021-67582001/03/05 |
| WebSite: |
http://chemicals.thermofisher.cn |
| Company Name: |
Energy Chemical |
| Tel: |
021-021-58432009 400-005-6266 |
| Fax: |
021-58436166 |
| WebSite: |
http://www.energy-chemical.com |
| Company Name: |
Capot Chemical Co., Ltd |
| Tel: |
+86 (0) 571 85 58 67 18 |
| Fax: |
0086-571-85864795 |
| WebSite: |
www.capotchem.com |
|