ChemicalBook >>Triethylene glycol dimethacrylate>>Ethane-1,2-diylbis(oxyethane-2,1-diyl) bis(2-methylacrylate)(109-16-0)

Ethane-1,2-diylbis(oxyethane-2,1-diyl) bis(2-methylacrylate)(109-16-0)

Ethane-1,2-diylbis(oxyethane-2,1-diyl) bis(2-methylacrylate)(109-16-0)
Product IdentificationBack to Contents
【Product Name】

Ethane-1,2-diylbis(oxyethane-2,1-diyl) bis(2-methylacrylate)
【Synonyms】

1,2-bis(2-(methacryloyloxy)ethoxy)ethane
2,2'-Ethylenedioxydiethyl dimethacrylate
Ethylenebis(oxyethylene) methacrylate
NK ester 3G
Tedma
TGM 3
【CAS】

109-16-0
【Formula】

C14H22O6
【Molecular Weight】

286.36
【EINECS】

203-652-6
【RTECS】

OZ4100000
【RTECS Class】

Mutagen
【Beilstein/Gmelin】

1797351
【Beilstein Reference】

4-02-00-01531
Physical and Chemical PropertiesBack to Contents
【Boiling Point】

135 - 139 (1 torr)
【Density】

1.0741 g/cm3 (20 C)
【Partition Coefficient】

1.88
【Usage】

Crosslinking agent for hard contact lenses.
【Refractive Index】

1.4623 (20 C)
First Aid MeasuresBack to Contents
【Ingestion】

Significant systemic toxicity is not expected after acute ingestion; gastrointestinal decontamination is generally not warranted.
【Inhalation】

If symptoms develop, move individual away from exposure and into fresh air. If symptoms persist, seek medical attention. If breathing is difficult, administer oxygen. Keep person warm and quiet; seek immediate medical attention.
【Skin】

Remove contaminated clothing and wash exposed area thoroughly with soap and water. A physician should examine the area if irritation or pain persists.
【Eyes】

Irrigate exposed eyes with copious amounts of tepid water for at least 15 minutes. If irritation, pain, swelling, lacrimation, or photophobia persist, the patient should be seen in a health care facility.
Handling and StorageBack to Contents
【Storage】

Keep in a cool, dry, dark location in a tightly sealed container or cylinder. Keep away from incompatible materials, ignition sources and untrained individuals. Secure and label area. Protect containers/cylinders from physical damage.
【Handling】

All chemicals should be considered hazardous. Avoid direct physical contact. Use appropriate, approved safety equipment. Untrained individuals should not handle this chemical or its container. Handling should occur in a chemical fume hood.
Hazards IdentificationBack to Contents
【Inhalation】

Respiratory depression, pulmonary edema, emphysema, and atelectasis have occurred in animals following large doses.
【Skin】

Allergic contact dermatitis has been reported. Eczematous reactions of onychial and paronychial tissues have been reported in patients using acrylic plastic nails. Dystrophic nail changes may persist for months. Irreversible loss of the fingernails has occurred.
【Ingestion】

Anorexia and nausea has been reported from inhalational exposure. Stomatitis has resulted from contact. Administration to rats by lavage failed to produce gastric lesions.
Exposure Controls/Personal ProtectionBack to Contents
【Personal Protection】

Suitable protective clothing and self-contained resp protective apparatus should be available for use by those who may have to rescue persons overcome by fumes.
【Respirators】

Use NIOSH/MSHA approved respirator appropriate for exposure of concern.
【Exposure Effects】

Paresthesia have been reported. Headache, irritability, drowsiness and dizziness may occur. There is no evidence of methyl methacrylate-induced teratogenicity in humans but there are conflicting reports in animals.
Fire Fighting MeasuresBack to Contents
【Fire Fighting】

Wear a self-contained breathing apparatus in pressure-demand, MSHA/NIOSH (approved or equivalent), and full protective gear. During a fire, irritating and highly toxic gases may be generated by thermal decomposition or combustion. Use agent most appropriate to extinguish fire.
Accidental Release MeasuresBack to Contents
【Small spills/leaks】

Evacuate area and ventilate. Wear protective equipment. If required, use an inert absrobent. Sweep up and place in an appropriate container for disposal. Wash contaminated surfaces.
Stability and ReactivityBack to Contents
【Stability】

No data.
【Incompatibilities】

Strong oxidizing agents.
Company Name: Qingdao RENAS Polymer Material Co.,Ltd.
Tel: 0532-0532-86867058 18562606086
Fax: 0532-86867058
WebSite: http://www.qdrenas.com
Company Name: Qingdao ZKHT Chemical Co., Ltd.
Tel: 532-86898076
Fax: 86-532-86898076
WebSite: http://www.zkhtchem.com
Company Name: Hubei Zhonglong Kangsheng fine chemical Co.,Ltd
Tel: 027-83850299 15827297403
Fax: Q2315383731
WebSite: https://www.chemicalbook.com/supplier/23864239/
Company Name: Guangzhou Shanghe Chemical Technology Co., Ltd
Tel: 13352869970
Fax:
WebSite: www.gzshhxkj.com/index.htm
Company Name: SUMMIT CHEMICAL
Tel: 020-82567763 13609796592
Fax:
WebSite:
Company Name: J & K SCIENTIFIC LTD.
Tel: 010-82848833 400-666-7788
Fax: 86-10-82849933
WebSite: http://www.jkchemical.com
Company Name: Meryer (Shanghai) Chemical Technology Co., Ltd.
Tel: 021-61259108 18621169109
Fax: 86-21-61259102
WebSite: www.meryer.com/cn/index/
Company Name: TCI (Shanghai) Development Co., Ltd.
Tel: 021-67121386
Fax: 021-67121385
WebSite: https://www.tcichemicals.com/CN/zh/