| Identification | More | [Name]
2,3-DIMETHYLBUTANE | [CAS]
79-29-8 | [Synonyms]
2,3-DIMETHYLBUTANE
DIISOPROPANE
DIISOPROPYL
(CH3)2CHCH(CH3)2
1,1,2,2-tetramethylethane
2,3-dimethyl-butan
Biisopropyl
butane,2,3-dimethyl-
dimethyl-2,3butane
2,3-DIMETHYLBUTANE, STANDARD FOR GC
2,3-Dimethylbutane,99%
2,3-Dimethylbutane, 98+%
DIMETHYLBUTANE
2,3-Dimethybutane
sym-Tetramethylethane | [EINECS(EC#)]
201-193-6 | [Molecular Formula]
C6H14 | [MDL Number]
MFCD00008925 | [Molecular Weight]
86.18 | [MOL File]
79-29-8.mol |
| Chemical Properties | Back Directory | [Appearance]
colourless liquid | [Melting point ]
-129 °C | [Boiling point ]
58 °C(lit.) | [density ]
0.662 g/mL at 25 °C(lit.)
| [vapor density ]
3 (vs air)
| [vapor pressure ]
7.41 psi ( 37.7 °C)
| [refractive index ]
n20/D 1.375(lit.)
| [Fp ]
−28 °F
| [storage temp. ]
Flammables area | [solubility ]
In methanol: 495, 593, 760, and 1,700 g/L at 5, 10, 15, and 20 °C, respectively. Miscible at higher
temperatures (Kiser et al., 1961). | [form ]
Liquid | [pka]
>14 (Schwarzenbach et al., 1993) | [color ]
Colorless | [Stability:]
Stable. Flammable. Readily forms explosive mixtures with air. Note low flash point. Incompatible with strong oxidizing agents, oxygen. | [explosive limit]
~7.7% | [Odor Threshold]
0.42ppm | [Water Solubility ]
Soluble in water (1mg/ml @22°C), DMSO, ethanol, acetone. | [BRN ]
1730737 | [Henry's Law Constant]
1.28(atm?m3/mol) at 25 °C (Mackay and Shiu, 1981) | [Dielectric constant]
1.8899999999999999 | [Exposure limits]
ACGIH TLV: TWA and STEL for all isomers except n-hexane are 500 and
1,000 ppm, respectively (adopted). | [InChIKey]
ZFFMLCVRJBZUDZ-UHFFFAOYSA-N | [LogP]
3.42 | [CAS DataBase Reference]
79-29-8(CAS DataBase Reference) | [EPA Substance Registry System]
2,3-Dimethylbutane (79-29-8) |
| Safety Data | Back Directory | [Hazard Codes ]
F,Xn | [Risk Statements ]
R11:Highly Flammable.
R65:Harmful: May cause lung damage if swallowed. | [Safety Statements ]
S16:Keep away from sources of ignition-No smoking .
S23:Do not breathe gas/fumes/vapor/spray (appropriate wording to be specified by the manufacturer) .
S33:Take precautionary measures against static discharges .
S62:If swallowed, do not induce vomiting: seek medical advice immediately and show this container or label . | [RIDADR ]
UN 2457 3/PG 2
| [WGK Germany ]
3
| [RTECS ]
EJ9350000
| [Autoignition Temperature]
788 °F | [TSCA ]
Yes | [HazardClass ]
3 | [PackingGroup ]
II | [HS Code ]
29011000 | [Safety Profile]
Probably an irritant and
narcotic in high concentration. A very
dangerous fire and explosion hazard when
exposed to heat or flame; can react
vigorously with oxidizing materials. Keep
away from heat and open flame. To fight
fire, use foam, CO2, dry chemical. When
heated to decomposition it emits acrid
smoke and irritating fumes. | [Hazardous Substances Data]
79-29-8(Hazardous Substances Data) |
| Hazard Information | Back Directory | [General Description]
A clear colorless liquid with a petroleum-like odor. Flash point-20°F. Less dense than water and insoluble in water. Vapors heavier than air. | [Reactivity Profile]
Saturated aliphatic hydrocarbons, such as 2,3-DIMETHYLBUTANE(79-29-8), may be incompatible with strong oxidizing agents like nitric acid. Charring of the hydrocarbon may occur followed by ignition of unreacted hydrocarbon and other nearby combustibles. In other settings, aliphatic saturated hydrocarbons are mostly unreactive. They are not affected by aqueous solutions of acids, alkalis, most oxidizing agents, and most reducing agents. This compound is incompatible with oxidizing materials. 2,3-DIMETHYLBUTANE(79-29-8) is also incompatible with oxygen. . | [Air & Water Reactions]
Highly flammable. Insoluble in water. | [Health Hazard]
Inhalation or contact with material may irritate or burn skin and eyes. Fire may produce irritating, corrosive and/or toxic gases. Vapors may cause dizziness or suffocation. Runoff from fire control or dilution water may cause pollution. | [Description]
2,3-Dimethylbutane is a colorless liquid.Molecular weight= 86.20; Boiling point = 58℃; Flashpoint= 229℃; Autoignition temperature= 405℃.Explosive limits: LEL = 1.2%; UEL= 7.0%. HazardIdentification (based on NFPA-704 M Rating System):Health 2, Flammability 3, Reactivity 0. Insoluble in water | [Chemical Properties]
2,3-Dimethylbutane, C6H14, is a flammable liquid with a
specific gravity of 0.66164. It is released into the atmosphere
from automobile, biomass combustion, and gasoline vapor
emissions. | [Chemical Properties]
colourless liquid | [Physical properties]
Colorless liquid with a mild gasoline-like odor. An odor threshold concentration of 4.2 ppmv was
reported by Nagata and Takeuchi (1990). | [Uses]
2,3-Dimethylbutane is used in high octane fuels and in organic synthesis. It is also used as a gas chromatography standard. | [Uses]
It is
used in high-octane fuels and in organic synthesis. | [Definition]
ChEBI: 2,3-dimethylbutane is an alkane that is butane substituted by a methyl group at positions 2 and 3. It is an alkane and a volatile organic compound. It derives from a hydride of a butane. | [Production Methods]
2,3-Dimethylbutane is produced from crude oil, natural
liquid gases, and petroleum refining processes. | [Flammability and Explosibility]
Flammable | [Potential Exposure]
2,3-Dimethylbutane is used in highoctane fuel and to make organic chemicals. | [First aid]
If this chemical gets into the eyes, remove anycontact lenses at once and irrigate immediately for at least15 min, occasionally lifting upper and lower lids. Seek medical attention immediately. If this chemical contacts theskin, remove contaminated clothing and wash immediatelywith soap and water. Seek medical attention immediately. Ifthis chemical has been inhaled, remove from exposure,begin rescue breathing (using universal precautions, including resuscitation mask) if breathing has stopped and CPR ifheart action has stopped. Transfer promptly to a medicalfacility. When this chemical has been swallowed, get medical attention. Give large quantities of water and i | [Source]
Comprised 1.6 to 2.6 vol % of total evaporated hydrocarbons from gasoline tank (quoted,
Verschueren, 1983). Schauer et al. (1999) reported 2,3-dimethylbutane in a diesel-powered
medium-duty truck exhaust at an emission rate of 570 μg/km.
California Phase II reformulated gasoline contained 2,3-dimethylbutane at a concentration of
12.9 g/kg. Gas-phase tailpipe emission rates from gasoline-powered automobiles with and without
catalytic converters were 2.14 and 298 mg/km, respectively (Schauer et al., 2002). | [Environmental Fate]
Photolytic. Major products reported from the photooxidation of 2,3-dimethylbutane with
nitrogen oxides are carbon monoxide and acetone. Minor products included formaldehyde,
acetaldehyde and peroxyacyl nitrates (Altshuller, 1983). Synthetic air containing gaseous nitrous
acid and exposed to artificial sunlight (λ = 300–450 nm) photooxidized 2,3-dimethylbutane into
acetone, hexyl nitrate, peroxyacetal nitrate, and a nitro aromatic compound tentatively identified
as a propyl nitrate (Cox et al., 1980).
Chemical/Physical. Complete combustion in air yields carbon dioxide and water vapor. 2,3-
Dimethylbutane will not hydrolyze because it has no hydrolyzable functional group. | [storage]
Color Code—Red: Flammability Hazard: Store ina flammable liquid storage area or approved cabinet awayfrom ignition sources and corrosive and reactive materials.Prior to working with 2,3-dimethylbutane you should betrained on its proper handling and storage. Before enteringconfined space where this chemical may be present, checkto make sure that an explosive concentration does not exist.2,3-Dimethylbutane must be stored to avoid contact withoxidizers (such as perchlorates, peroxides, permanganates,chlorates, and nitrates), since violent reactions occur.Sources of ignition, such as smoking and open flames, areprohibited where 2,3-dimethylbutane is handled, used, orstored. Metal containers involving the transfer of 5 gallonsor more of 2,3-dimethylbutane should be grounded andbonded. Drums must be equipped with self-closing valves,pressure vacuum bungs, and flame arresters. Use only nonsparking tools and equipment, especially when opening andclosing containers of 2,3-dimethylbutane. Wherever 2,3-dimethylbutane is used, handled, manufactured, or | [Shipping]
This compound requires a shipping label of“FLAMMABLE LIQUID.” It falls in Hazard Class 3 andPacking Group II. | [Purification Methods]
Distil it from sodium, pass it through a column of silica gel (activated by heating in nitrogen to 350o before use) to remove unsaturated impurities, and again distil it from sodium. Also distil it azeotropically with MeOH, then wash with water, dry (Na2SO4) it, and redistil it. [Beilstein 1 IV 371.] | [Incompatibilities]
Forms explosive mixture with air.Violent reaction with oxygen, strong oxidizers. |
|
| Company Name: |
Alfa Aesar
|
| Tel: |
400-6106006 |
| Website: |
http://chemicals.thermofisher.cn |
|