- Copper dinitrate
-
- $15.00 / 1KG
-
2021-08-12
- CAS:3251-23-8
- Min. Order: 1KG
- Purity: 99%+ HPLC
- Supply Ability: Monthly supply of 1 ton
- Cupric nitrate
-
- $9.80 / 1KG
-
2020-01-10
- CAS:3251-23-8
- Min. Order: 1KG
- Purity: ≥98%
- Supply Ability: 20 tons
|
| | Copper dinitrate Chemical Properties |
| Melting point | 115°C | | density | 1.00 g/mL at 20 °C | | vapor pressure | 0Pa at 25℃ | | solubility | soluble in dioxane; reacts with ethyl ether | | form | blue-green orthorhombic crystals | | color | blue-green orthorhombic crystals, crystalline;
hygroscopic | | Water Solubility | Soluble | | Merck | 13,2671 | | Stability: | Stable. Oxidant. Incompatible with combustible materials. | | Surface tension | 73.2mN/m at 1.3g/L and 20.2℃ | | CAS DataBase Reference | 3251-23-8(CAS DataBase Reference) | | EPA Substance Registry System | Cupric nitrate (3251-23-8) |
| | Copper dinitrate Usage And Synthesis |
| Physical Properties | Blue-green orthorhombic crystals; deliquescent; sublimes; readily dissolves in water, alcohols and dioxane.
The trihydrate and hexahydrate are blue rhombohedral crystals; hygroscopic; density 2.32 g/cm3 (trihydrate), 2.07 g/cm3 (hexahydrate); melts at 114°C (trihydrate); trihydrate decomposes at 170°C; hexahydrate decomposes to trihydrate at 26.4°C; both the hydrates are very soluble in water and ethanol.
| | Uses | Copper(II) nitrate is used in light-sensitive reproduction papers; as a mordant in dyeing and printing of fabrics; as a coloring reagent for ceramics; for coloring copper black; as a burnishing agent for iron; in nickel-plating baths; in pyrotechnic compositions; and in paints, varnishes, and enamels. Other applications are as an oxidizing agent; nitrating agent for aromatics; as a catalyst; and an analytical standard for copper.
Copper nitrate trihydrate occurs in nature as the mineral gerhardite.
| | Preparation | Copper(II) nitrate is made by action of copper or copper(II) oxide with nitric acid. The solution is evaporated and the product is obtained by crystallization CuO + 2HNO3 → Cu(NO3)2 + H2O
The nitrate salt prepared by this method is hydrated. It cannot be dehydrated fully without decomposition. Anhydrous CuNO3 may be prepared by dissolving copper metal in a solution of dinitrogen tetroxide, N2O4, in ethyl acetate. Upon crystallization, an N2O4 adduct of Cu(NO3)2 that probably has the composition [NO+][Cu(NO3)3] is obtained. This adduct, on heating at 90°C, yields blue anhydrous copper(II) nitrate which can be sublimed in vacuum at 150°C and collected.
| | Reactions | Thermal decomposition of copper(II) nitrate produces copper oxides and nitrogen oxides.
In aqueous solutions, copper(II) nitrate undergoes many double decomposition reactions with soluble salts of other metals, forming precipitates of insoluble copper salts.
When H2S is passed through its aqueous solution, black CuS precipitates. Copper(II) nitrate reacts with ether forming a complex.
| | Hazard | Copper(II) nitrate is moderately toxic by ingestion. Skin or eye contact can cause irritation.
LD50 oral (rat): 940 mg/kg.
Copper(II) nitrate, being an oxidizing agent, can undergo violent reactions with readily oxidizable substances. Reaction with acetic anhydride is violent, and heating with potassium or ammonium ferrocyanide at 220°C may cause an explosion. It can ignite paper on prolonged contact.
| | Description | Cupric nitrate is a blue crystalline solid.Molecular weight=187.55; Boiling point=170℃ (decomposes below this point); Freezing/Melting point=115℃.Soluble in water. Hazard Identification (based on NFPA-704 M Rating System): Health 1, Flammability 0,Reactivity 3 (Oxidizer). Soluble in water;solubility=135 g/100 mL (trihydrate). | | Chemical Properties | Cupric nitrate is a Blue crystalline solid. | | Uses | Light-sensitive papers; analytical reagent; mordant in textile dyeing; nitrating agent; insecticide
for vines; coloring copper black; electroplating;
production of burnished effect on iron; paints; varnishes, enamels; pharmaceutical preparations; catalyst. | | Definition | ChEBI: An inorganic nitrate salt having copper(2+) as the couterion. | | General Description | Obtained as a trihydrate and as a hexahydrate. Both are blue crystalline solids. Used in medicine, as an insecticide, in chemical analysis, in making light sensitive papers. Toxic oxides of nitrogen are produced in fires involving Copper dinitrate. | | Air & Water Reactions | Deliquescent. Water soluble. | | Reactivity Profile | Mixtures of Copper dinitrate with alkyl esters may explode, owing to the formation of alkyl nitrates. Mixtures with phosphorus, tin(II) chloride or other reducing agents may react explosively [Bretherick, 1979 p. 108-109]. A finely divided mixture of potassium ferrocyanide and Copper dinitrate exploded when dried at 220°C [Chem. Abst. 77:1343 (1972)]. Noncombustible, but Copper dinitrate will accelerate the burning of combustible materials. If large quantities of the material are involved in a fire or the material is finely divided, an explosion may result. Prolonged exposure to fire or heat may result in an explosion. | | Hazard | Oxidizer, causes violent combustion or
explosion with organic materials. | | Health Hazard | Inhalation causes irritation of throat and lungs. Ingestion of large amounts causes violent vomiting and purging, intense pain, collapse, coma, convulsions, and paralysis. Solutions irritate eyes; contact with solid causes severe eye surface injury and skin irritation. | | Safety Profile | Moderately toxic by
ingestion. A severe eye and skin irritant.
Potentially explosive reaction above 22OOC
with ammonium or potassium
hexacyanoferrate(I1). Reaction with
ammonia + potassium amide gives explosive
product. Violent reaction with acetic anhydride. May ignite on prolonged contact
with paper. Concentrated solutions may
ipte in contact with tin or aluminum foil.
Used as a fungicide, herbicide, and as a
catalyst component in solid rocket fuel.
When heated to decomposition it emits
toxic fumes of NOx. See also COPPER
COMPOUNDS and NITRATES. | | Potential Exposure | Cupric nitrate is used as an insecticide, in paint, varnish, enamel, and in wood preservatives. Metal compounds are often used in “hot” operations in the work-place. These may include, but are not limited to, welding, brazing, soldering, plating, cutting, and metallizing. At the high temperatures reached in these operations, metals often form metal fumes which have different health effects and exposure standards than the original metal compound and require specialized controls. | | First aid | If this chemical gets into the eyes, remove anycontact lenses at once and irrigate immediately for at least15 min, occasionally lifting upper and lower lids. Seek medical attention immediately. If this chemical contacts theskin, remove contaminated clothing and wash immediatelywith soap and water. Seek medical attention immediately. Ifthis chemical has been inhaled, remove from exposure,begin rescue breathing (using universal precautions, including resuscitation mask) if breathing has stopped and CPR ifheart action has stopped. Transfer promptly to a medicalfacility. When this chemical has been swallowed, get medical attention. Give large quantities of water and inducevomiting. Do not make an unconscious person vomit.Medical observation is recommended for 24-48 h afterbreathing overexposure, as pulmonary edema may bedelayed. As first aid for pulmonary edema, a doctor orauthorized paramedic may consider administering a corticosteroid spray.
Note to physician: In case of fume inhalation, treat for pulmonary edema. Give prednisone or other corticosteroid orally to reduce tissue response to fume. Positive pressureventilation may be necessary. Treat metal fume fever withbed rest, analgesics, and antipyretics. The symptoms ofmetal fume fever may be delayed for 4-12 h followingexposure: it may last less than 36 h. | | Shipping | UN1479 Oxidizing solid, n.o.s., Hazard Class: 5.1; Labels: 5.1-Oxidizer, Technical Name Required. | | Purification Methods | Crystallise it from weak aqueous HNO3 (0.5mL/g) by cooling from room temperature. The anhydrous salt can be prepared by dissolving copper metal in a 1:1 mixture of liquid NO2 and ethyl acetate and purified by sublimation [Evans et al. J Chem Soc, Faraday Trans 1 75 1023 1979]. The hexahydrate dehydrates to the trihydrate at 26o, and the anhydrous salt sublimes between 150 and 225o, but melts at 255-256o and is deliquescent. | | Incompatibilities | A strong oxidizer. Aqueous solution is acidic; incompatible with bases. Violent reaction with potassium hexacyanoferrate; ammonia and potassium amide mixtures; acetic anhydrides, cyanides, ethers. Forms explosive materials with nitromethanes, sodium hypobromite; acetylene; chemically active metals, such as potassium, sodium, etc. May ignite on contact with aluminum foil or tin. Risk of spontaneous combustion with combustibles (wood, cloth, etc.) organics, or reducing agents and readily oxidizable materials. Attacks metals in the presence of moisture. | | Waste Disposal | Copper-containing soluble wastes can be concentrated through the use of ion exchange, reverse osmosis, or evaporators to the point where copper can be electrolytically removed and sent to a reclaiming firm. If recovery is not feasible, the copper can be precipitated through the use of caustics and the sludge deposited in a chemical waste landfill. Add slowly to water; stir in excess soda ash. Let stand, then neutralize. Decant solution and flush to sewer; landfill sludge |
| | Copper dinitrate Preparation Products And Raw materials |
|