|
| 2-(1-Cyclohexenyl)ethylamine Basic information |
| 2-(1-Cyclohexenyl)ethylamine Chemical Properties |
Melting point | -55 °C | Boiling point | 53-54 °C/2.5 mmHg (lit.) | density | 0.898 g/mL at 25 °C (lit.) | refractive index | 1.486-1.488 | Fp | 57 °C | solubility | Chloroform (Slightly), Methanol (Slightly) | form | clear liquid | pka | 10.94±0.10(Predicted) | color | Colorless to Light yellow | Sensitive | Air Sensitive | BRN | 774030 | Stability: | Light Sensitive | InChIKey | IUDMXOOVKMKODN-UHFFFAOYSA-N | CAS DataBase Reference | 3399-73-3(CAS DataBase Reference) | EPA Substance Registry System | 1-Cyclohexene-1-ethanamine (3399-73-3) |
Hazard Codes | C | Risk Statements | 34 | Safety Statements | 28A-26-45-36/37/39 | RIDADR | 2735 | WGK Germany | 3 | TSCA | Yes | HazardClass | 8 | PackingGroup | II | HS Code | 29213000 |
| 2-(1-Cyclohexenyl)ethylamine Usage And Synthesis |
Chemical Properties | CLEAR COLOURLESS TO LIGHT YELLOW LIQUID | Uses | 2-(1-Cyclohexenyl)ethylamine has been employed:
- as substrate for allylic hydroxylation reaction
- in preparation of thin films and single crystals of 2-(1-cyclohexenyl)ethyl ammonium lead iodide, used to fabricate optoelectronic-compatible heterostructures
| Synthesis | 125 ml of ethylamine was placed in a 250 ml three-necked flask, which had previously been flushed with argon, at -70 ° C. 6.27 g (50 mmol) of 2-phenylethylamine was added. The resulting clear, colorless solution was metered in with 1.14 g (164.2 mmol) of Li powder; the solution turned dark blue 5 minutes after the onset of turbidity. After stirring for 2 hours at -70 ° C, the mixture was warmed to -30 ° C. Then another 0.24 g (34.6 mmol) of Li powder was added. After stirring again at -30 ° C. for 2 hours, the cooling bath was removed. The reaction mixture was allowed to warm to room temperature overnight. The reaction mixture was then given 25 ml of abs. After that, a gray suspension formed. After stirring for 20 minutes at room temperature, 25 ml of water was slowly added (exothermic temperature 40 ° C.). The excess ethylamine was then distilled off at 40 °C. The distillation residue was evaporated to dryness. Then, 100 ml of water was added and extracted 3 times with 80 ml chloroform. The combined organic phases were dried over Na?SO?, filtered, and evaporated. The
2-(1-Cyclohexenyl)ethylamine was obtained in a GC yield of 69.8%. |
| 2-(1-Cyclohexenyl)ethylamine Preparation Products And Raw materials |
|