Chemical Safety Data Sheet MSDS / SDS

Bis(2-chloroethoxy)methane

Revision Date:2024-03-16Revision Number:1

SECTION 1: Identification of the substance/mixture and of the company/undertaking

Product identifier

  • Product name: Bis(2-chloroethoxy)methane
  • CBnumber: CB3440463
  • CAS: 111-91-1
  • EINECS Number: 203-920-2
  • Synonyms: Bis(2-chloroethoxy)methane

Relevant identified uses of the substance or mixture and uses advised against

  • Relevant identified uses: For R&D use only. Not for medicinal, household or other use.
  • Uses advised against: none

Company Identification

  • Company: Chemicalbook
  • Address: Building 1, Huihuang International, Shangdi 10th Street, Haidian District, Beijing
  • Telephone: 400-158-6606

SECTION 2: Hazards identification

Classification of the substance or mixture

Acute toxicity - Category 3, Oral

Acute toxicity - Category 4, Dermal

Acute toxicity - Category 2, Inhalation

Specific target organ toxicity – single exposure, Category 1

Specific target organ toxicity – repeated exposure, Category 2

Label elements

Pictogram(s)
  • Signal word

    Danger

Hazard statement(s)

H301 Toxic if swallowed

H312 Harmful in contact with skin

H330 Fatal if inhaled

H370 Causes damage to organs

H373 May cause damage to organs through prolonged or repeated exposure

Precautionary statement(s)
Prevention

P264 Wash ... thoroughly after handling.

P270 Do not eat, drink or smoke when using this product.

P280 Wear protective gloves/protective clothing/eye protection/face protection/hearing protection/...

P260 Do not breathe dust/fume/gas/mist/vapours/spray.

P271 Use only outdoors or in a well-ventilated area.

P284 [In case of inadequate ventilation] wear respiratory protection.

Response

P301+P316 IF SWALLOWED: Get emergency medical help immediately.

P321 Specific treatment (see ... on this label).

P330 Rinse mouth.

P302+P352 IF ON SKIN: Wash with plenty of water/...

P317 Get medical help.

P362+P364 Take off contaminated clothing and wash it before reuse.

P304+P340 IF INHALED: Remove person to fresh air and keep comfortable for breathing.

P316 Get emergency medical help immediately.

P320 Specific treatment is urgent (see ... on this label).

P308+P316 IF exposed or concerned: Get emergency medical help immediately.

P319 Get medical help if you feel unwell.

Storage

P405 Store locked up.

P403+P233 Store in a well-ventilated place. Keep container tightly closed.

Disposal

P501 Dispose of contents/container to an appropriate treatment and disposal facility in accordance with applicable laws and regulations, and product characteristics at time of disposal.

Other hazards

no data available

SECTION 3: Composition/information on ingredients

Substance

  • Product name: Bis(2-chloroethoxy)methane
  • Synonyms: Bis(2-chloroethoxy)methane
  • CAS: 111-91-1
  • EC number: 203-920-2
  • MF: C5H10Cl2O2
  • MW: 173.04

SECTION 4: First aid measures

Description of first aid measures

If inhaled

Move the victim into fresh air. If breathing is difficult, give oxygen. If not breathing, give artificial respiration and consult a doctor immediately. Do not use mouth to mouth resuscitation if the victim ingested or inhaled the chemical.

Following skin contact

Take off contaminated clothing immediately. Wash off with soap and plenty of water. Consult a doctor.

Following eye contact

Rinse with pure water for at least 15 minutes. Consult a doctor.

Following ingestion

Rinse mouth with water. Do not induce vomiting. Never give anything by mouth to an unconscious person. Call a doctor or Poison Control Center immediately.

Most important symptoms and effects, both acute and delayed

ACUTE/CHRONIC HAZARDS: Toxic by inhalation and ingestion; Strong irritant. (NTP, 1992)

Indication of any immediate medical attention and special treatment needed

no data available

SECTION 5: Firefighting measures

Extinguishing media

To fight fire, use alcohol foam, foam, CO2 or dry chemical.

Specific Hazards Arising from the Chemical

Not Flammable. (NTP, 1992)

Advice for firefighters

Wear self-contained breathing apparatus for firefighting if necessary.

NFPA 704

2
1
0
HEALTH 2 Intense or continued but not chronic exposure could cause temporary incapacitation or possible residual injury (e.g. diethyl ether, ammonium phosphate, iodine)
FIRE 1 Materials that require considerable preheating, under all ambient temperature conditions, before ignition and combustion can occur. Includes some finely divided suspended solids that do not require heating before ignition can occur. Flash point at or above 93.3 °C (200 °F). (e.g. mineral oil, ammonia)
REACT 0 Normally stable, even under fire exposure conditions, and is not reactive with water (e.g. helium,N2)
SPEC. HAZ.

SECTION 6: Accidental release measures

Personal precautions, protective equipment and emergency procedures

Avoid dust formation. Avoid breathing mist, gas or vapours.Avoid contacting with skin and eye. Use personal protective equipment.Wear chemical impermeable gloves. Ensure adequate ventilation.Remove all sources of ignition. Evacuate personnel to safe areas.Keep people away from and upwind of spill/leak.

Environmental precautions

Prevent further spillage or leakage if it is safe to do so. Do not let the chemical enter drains. Discharge into the environment must be avoided.

Methods and materials for containment and cleaning up

Collect and arrange disposal. Keep the chemical in suitable and closed containers for disposal. Remove all sources of ignition. Use spark-proof tools and explosion-proof equipment. Adhered or collected material should be promptly disposed of, in accordance with appropriate laws and regulations.

SECTION 7: Handling and storage

Precautions for safe handling

Handling in a well ventilated place. Wear suitable protective clothing. Avoid contact with skin and eyes. Avoid formation of dust and aerosols. Use non-sparking tools. Prevent fire caused by electrostatic discharge steam.

Conditions for safe storage, including any incompatibilities

Materials which are toxic as stored or which can decomp into toxic components due to contact with heat, moisture, acid, or acid fumes, should be stored in cool, well-ventilated place, out of direct rays of sun, away from areas of high fire hazard and should be periodically inspected and monitored.

SECTION 8: Exposure controls/personal protection

Control parameters

Occupational Exposure limit values

no data available

Biological limit values

no data available

Exposure controls

Ensure adequate ventilation. Handle in accordance with good industrial hygiene and safety practice. Set up emergency exits and the risk-elimination area.

Individual protection measures

Eye/face protection

Wear tightly fitting safety goggles with side-shields conforming to EN 166(EU) or NIOSH (US).

Skin protection

Wear fire/flame resistant and impervious clothing. Handle with gloves. Gloves must be inspected prior to use. Wash and dry hands. The selected protective gloves have to satisfy the specifications of EU Directive 89/686/EEC and the standard EN 374 derived from it.

Respiratory protection

If the exposure limits are exceeded, irritation or other symptoms are experienced, use a full-face respirator.

Thermal hazards

no data available

SECTION 9: Physical and chemical properties

Information on basic physicochemical properties

  • Physical stateOil
  • ColourColorless liquid
  • Odour

    no data available

  • Melting point/freezing point

    -37 °C. Atm. press.:101.4 kPa.

  • Boiling point or initial boiling point and boiling range

    220 °C. Atm. press.:101.4 kPa.

  • Flammability

    no data available

  • Lower and upper explosion limit/flammability limit

    no data available

  • Flash point

    103 °C. Atm. press.:101.5 kPa.

  • Auto-ignition temperature

    395 °C. Atm. press.:> 1 013.3 - < 1 014.9 hPa.

  • Decomposition temperature

    no data available

  • pH

    2.3.

  • Kinematic viscosity

    kinematic viscosity (in mm2/s) = 3.74. Temperature:20°C.

  • SolubilityChloroform (Sparingly), Methanol (Slightly)
  • Partition coefficient n-octanol/water

    log Pow = 1.6. Temperature:25 °C.

  • Vapour pressure1 at 53 °C (Weast, 1986)
  • Density and/or relative density

    1.23 g/cm3. Temperature:20 °C.

  • Relative vapour density

    5.9 (Air= 1)

  • Particle characteristics

    no data available

SECTION 10: Stability and reactivity

Reactivity

Slightly soluble in water.

Chemical stability

no data available

Possibility of hazardous reactions

Combustible.BIS(2-CHLOROETHOXY)METHANE, [LIQUID], the b-chloroethyl acetal of formaldehyde, is incompatible with oxidizing agents.

Conditions to avoid

no data available

Incompatible materials

Oxidizing materials.

Hazardous decomposition products

When heated to decomp it emits... fumes of /hydrogen chloride/.

SECTION 11: Toxicological information

Acute toxicity

  • Oral: LD50 Rat (Sherman) oral 65 mg/kg
  • Inhalation: LC50 - rat (male/female) - > 0.05 - <= 0.5 mg/L air.
  • Dermal: LD50 - rat (female) - > 1 000 - < 2 000 mg/kg bw.

Skin corrosion/irritation

no data available

Serious eye damage/irritation

no data available

Respiratory or skin sensitization

no data available

Germ cell mutagenicity

no data available

Carcinogenicity

CLASSIFICATION: D: not classifiable as to human carcinogenicity. BASIS FOR CLASSIFICATION: No human data and no animal data. HUMAN CARCINOGENICITY DATA: inadequate. AMIMAL CARCINOGENICITY DATA: Inadequate.

Reproductive toxicity

no data available

STOT-single exposure

no data available

STOT-repeated exposure

no data available

Aspiration hazard

no data available

SECTION 12: Ecological information

Toxicity

  • Toxicity to fish: LC50 - Danio rerio (previous name: Brachydanio rerio) - 50.2 mg/L - 96 h.
  • Toxicity to daphnia and other aquatic invertebrates: EC50 - Daphnia magna - 201 mg/L - 48 h.
  • Toxicity to algae: EC50 - Desmodesmus subspicatus (previous name: Scenedesmus subspicatus) - 35 mg/L - 72 h.
  • Toxicity to microorganisms: EC50 - activated sludge of a predominantly domestic sewage - > 100 mg/L - 3 h. Remarks:Respiration rate.

Persistence and degradability

Bis(2-chloroethoxy)methane underwent 0% biodegradation using settled domestic wastewater as an inoculum; biodegradation remained at 0% through three subcultures. Bis(2-chloroethoxy)methane was thus listed as being not biodegraded under the conditions of the method, the lowest of a three tier rating system(1,2). When the influent to a full scale activated sludge treatment system was spiked with 0.24 ug/l bis(2-chloroethoxy)methane, 60% of the pollutant was removed(3); however, it was not reported if removal was due to biodegradation or some other removal process(SRC).

Bioaccumulative potential

An estimated BCF of 4 was calculated for bis(2-chloroethoxy)methane(SRC), using a water solubility of 7,800 mg/l(1) and a regression-derived equation(2). According to a classification scheme(3), this BCF suggests the potential for bioconcentration in aquatic organisms is low(SRC).

Mobility in soil

The Koc of bis(2-chloroethoxy)methane is estimated as 32(SRC), using a water solubility of 7,800 mg/l(1) and a regression-derived equation(2). According to a classification scheme(3), this estimated Koc value suggests that bis(2-chloroethoxy)methane is expected to have very high mobility in soil(SRC).

Other adverse effects

no data available

SECTION 13: Disposal considerations

Disposal methods

Product

The material can be disposed of by removal to a licensed chemical destruction plant or by controlled incineration with flue gas scrubbing. Do not contaminate water, foodstuffs, feed or seed by storage or disposal. Do not discharge to sewer systems.

Contaminated packaging

Containers can be triply rinsed (or equivalent) and offered for recycling or reconditioning. Alternatively, the packaging can be punctured to make it unusable for other purposes and then be disposed of in a sanitary landfill. Controlled incineration with flue gas scrubbing is possible for combustible packaging materials.

SECTION 14: Transport information

UN Number

ADR/RID: no data available

IMDG: no data available

IATA: no data available

UN Proper Shipping Name

ADR/RID: no data available

IMDG: no data available

IATA: no data available

Transport hazard class(es)

ADR/RID: 6.1 (For reference only, please check.)

IMDG: 6.1 (For reference only, please check.)

IATA: 6.1 (For reference only, please check.)

Packing group, if applicable

ADR/RID: III (For reference only, please check.)

IMDG: III (For reference only, please check.)

IATA: III (For reference only, please check.)

Environmental hazards

ADR/RID: No

IMDG: No

IATA: No

Special precautions for user

no data available

Transport in bulk according to IMO instruments

no data available

SECTION 15: Regulatory information

Safety, health and environmental regulations specific for the product in question

European Inventory of Existing Commercial Chemical Substances (EINECS)
Listed.
EC Inventory
Listed.
United States Toxic Substances Control Act (TSCA) Inventory
Listed.
China Catalog of Hazardous chemicals 2015
Not Listed.
New Zealand Inventory of Chemicals (NZIoC)
Not Listed.
PICCS
Not Listed.
Vietnam National Chemical Inventory
Listed.
IECSC
Listed.
Korea Existing Chemicals List (KECL)
Not Listed.

SECTION 16: Other information

Abbreviations and acronyms

  • CAS: Chemical Abstracts Service
  • ADR: European Agreement concerning the International Carriage of Dangerous Goods by Road
  • RID: Regulation concerning the International Carriage of Dangerous Goods by Rail
  • IMDG: International Maritime Dangerous Goods
  • IATA: International Air Transportation Association
  • TWA: Time Weighted Average
  • STEL: Short term exposure limit
  • LC50: Lethal Concentration 50%
  • LD50: Lethal Dose 50%
  • EC50: Effective Concentration 50%

References

  • IPCS - The International Chemical Safety Cards (ICSC), website: http://www.ilo.org/dyn/icsc/showcard.home
  • HSDB - Hazardous Substances Data Bank, website: https://toxnet.nlm.nih.gov/newtoxnet/hsdb.htm
  • IARC - International Agency for Research on Cancer, website: http://www.iarc.fr/
  • eChemPortal - The Global Portal to Information on Chemical Substances by OECD, website: http://www.echemportal.org/echemportal/index?pageID=0&request_locale=en
  • CAMEO Chemicals, website: http://cameochemicals.noaa.gov/search/simple
  • ChemIDplus, website: http://chem.sis.nlm.nih.gov/chemidplus/chemidlite.jsp
  • ERG - Emergency Response Guidebook by U.S. Department of Transportation, website: http://www.phmsa.dot.gov/hazmat/library/erg
  • Germany GESTIS-database on hazard substance, website: http://www.dguv.de/ifa/gestis/gestis-stoffdatenbank/index-2.jsp
  • ECHA - European Chemicals Agency, website: https://echa.europa.eu/
Disclaimer:

The information in this MSDS is only applicable to the specified product, unless otherwise specified, it is not applicable to the mixture of this product and other substances. This MSDS only provides information on the safety of the product for those who have received the appropriate professional training for the user of the product. Users of this MSDS must make independent judgments on the applicability of this SDS. The authors of this MSDS will not be held responsible for any harm caused by the use of this MSDS.

Recommended Products
CHLORODIBROMOMETHANE SDS Bis(2-chloroethoxy)methane SDS DIETHOXYMETHANE SDS Bromoacetaldehyde diethyl acetal SDS Diethanolamine SDS 1,3-Dioxan-5-ol SDS Triphenylmethyl Chloride SDS Dimethoxymethane SDS Sucralose SDS 2,2-Diethoxyethylamine SDS